Construction Machinery Attachment Hydraulic Pile Breaker/Cutter for Round Concrete Piles, Cutting Piles of 500
With advanced technologies and facilities, strict high quality control, reasonable value, exceptional company and close co-operation with prospects, we’ve been devoted to offering the very best worth for our consumers for Construction Machinery Attachment Hydraulic Pile Breaker/Cutter for Round Concrete Piles, Cutting Piles of 500-2200mm Diameter, Trust us, you’ll obtain a greater answer on car pieces industry.
With advanced technologies and facilities, strict high quality control, reasonable value, exceptional company and close co-operation with prospects, we’ve been devoted to offering the very best worth for our consumers for , we now have all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we have been trying our best to be your good partner.
FES pile breaker produces a perfect horizontal pile cutting without leaving cracks below the cut-off level. Using advanced modular design, it can be used for crushing piles of different diameters by changing the modular combination quantity.
-Convenient assembly allows easy transportation and increases work efficiency.
-Modular design makes it easy to adjust to each concrete pile diameter.
-Easy to maintain, with low maintenance cost.
-Simple and safe operating system, less staffing, lower construction cost.
-It can be installed on a large variety of construction machineries, realizing the versatility and economy.
-Three options available: round type, square type and walled type.
-Can be powered by either a power pack or any equipment installed with hydraulic power source (such as the excavator, etc.)
| Specification | Parameters |
| Pile diameter range | Φ960~Φ1050mm |
| Max. module quantity | 13 units |
| Max. rod pressure force | 280kN |
| Max. cylinder stroke | 135mm |
| Max. cylinder pressure force | 30MPa |
| Max. working flow of single cylinder | 20L/min |
| Max. height of single cut | ≤300mm |
| Complete machinery weight | ≥20t |
| Single module weight | 100kg |
| Single module size | 645×444×316mm |
| Operation size | 2098×4840mm |
| Total weight | 1.7t |
| Modulequantity | Pile dia. range (mm) | Platform weight (t) | Total weight (kg) | Single cutting height (mm) |
6 | 300~350 | ≥12 | 1000 | ≤300 |
7 | 300~450 | ≥12 | 1100 | ≤300 |
8 | 450~550 | ≥16 | 1200 | ≤300 |
9 | 550~650 | ≥16 | 1300 | ≤300 |
10 | 650~760 | ≥20 | 1400 | ≤300 |
11 | 760~860 | ≥20 | 1500 | ≤300 |
12 | 860~960 | ≥20 | 1600 | ≤300 |
13 | 960~1050 | ≥20 | 1700 | ≤300 |
Note: The chain sling may be broken if the single cutting height exceeds the max. value.
| Spec. | Parameters |
| Pile diameter range | Φ600~Φ1800mm |
| Max. module quantity | 18 units |
| Max. rod pressure force | 600kN |
| Max. cylinder stroke | 180mm |
| Max. cylinder pressure force | 30MPa |
| Max. working flow of single cylinder | 30L/min |
| Max. height of single cut | ≤300mm |
| Complete machinery weight | ≥35t |
| Single module weight | 230kg |
| Single module size | 696×565×350mm |
| Operation size | 3316×4000mm |
| Total weight | 4.5t |
Module quantity | Pile dia. range (mm) | Platform weight (t) | Total weight(kg) | Single cutting height (mm) |
8 | 600 | ≥20 | 2200 | ≤300 |
9 | 700 | ≥20 | 2430 | ≤300 |
10 | 800~900 | ≥25 | 2660 | ≤300 |
11 | 1000 | ≥25 | 2890 | ≤300 |
12 | 1100 | ≥25 | 3120 | ≤300 |
13 | 1200 | ≥28 | 3350 | ≤300 |
14 | 1300~1400 | ≥28 | 3580 | ≤300 |
15 | 1500 | ≥30 | 3810 | ≤300 |
16 | 1600 | ≥30 | 4040 | ≤300 |
17 | 1700 | ≥35 | 4270 | ≤300 |
18 | 1800 | ≥35 | 4500 | ≤300 |
Note: The chain sling may be broken if the single cutting height exceeds the max. value.
Specification | FP400S | FP450S | FP500S |
Pile diameter range | Φ250~Φ400mm | Φ350~Φ450mm | Φ350~Φ500mm |
Max. rod pressure force | 280kN | 280kN | 280kN |
Max. cylinder stroke | 135mm | 135mm | 135mm |
Max. cylinder pressure force | 30MPa | 30MPa | 30MPa |
Max. working flow of single cylinder | 20L/min | 20L/min | 20L/min |
Max. height of single cut | ≤300mm | ≤300mm | ≤300mm |
Complete machinery weight | ≥7t | ≥8t | ≥10t |
Operation size | 1440×1440×1500mm | 1490×1490×1500mm | 1588×1588×1500mm |
Total weight | 0.6t | 0.65t | 0.92t |
| Specification | FP800W |
| Max. rod pressure force | 280kN |
| Max. cylinder stroke | 135mm |
| Max. cylinder pressure force | 30MPa |
| Max. working flow of single cylinder | 20L/min |
| Single cut size (L×H) | 250×200mm |
| Cutting width range | 300×800mm |
| Complete machinery weight | ≥7t |
| Operation size(L×H×W) | 1880×748×920mm |
| Total weight | 1.2t |
With advanced technologies and facilities, strict high quality control, reasonable value, exceptional company and close co-operation with prospects, we’ve been devoted to offering the very best worth for our consumers for Construction Machinery Attachments Hydraulic Round Pile Breaker/Cutter for Round Concrete Piles, Cutting Piles of 500-2200mm Diameter, Trust us, you’ll obtain a greater answer on car pieces industry.
We now have all online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a experienced company, we have been trying our best to be your good partner.
