China Manufacturer for Hydraulic Pile Breaker Manufacturer and Exporter

Manufacturer for Hydraulic Pile Breaker

Product Detail

Product Tags

Our well-equipped facilities and great excellent command throughout all stages of generation enables us to guarantee total customer fulfillment for Tremie Pipe In Piling, Teeth Casing, Imt Drill Rigs, Our hugely specialized process eliminates the component failure and offers our consumers unvarying high quality, allowing us to control cost, plan capacity and maintain consistent on time delivery.

Manufacturer for Hydraulic Pile Breaker - Pile Breaker – FESDetail:

FES pile breaker produces a perfect horizontal pile cutting without leaving cracks below the cut-off level. Using advanced modular design, it can be used for crushing piles of different diameters by changing the modular combination quantity.

-Convenient assembly allows easy transportation and increases work efficiency.
-Modular design makes it easy to adjust to each concrete pile diameter.
-Easy to maintain, with low maintenance cost.
-Simple and safe operating system, less staffing, lower construction cost.
-It can be installed on a large variety of construction machineries, realizing the versatility and economy.
-Three options available: round type, square type and walled type.
-Can be powered by either a power pack or any equipment installed with hydraulic power source (such as the excavator, etc.)

Specification	Parameters
Pile diameter range	Φ960~Φ1050mm
Max. module quantity	13 units
Max. rod pressure force	280kN
Max. cylinder stroke	135mm
Max. cylinder pressure force	30MPa
Max. working flow of single cylinder	20L/min
Max. height of single cut	≤300mm
Complete machinery weight	≥20t
Single module weight	100kg
Single module size	645×444×316mm
Operation size	2098×4840mm
Total weight	1.7t

main1

Modulequantity	Pile dia. range (mm)	Platform weight (t)	Total weight (kg)	Single cutting height (mm)
6	300~350	≥12	1000	≤300
7	300~450	≥12	1100	≤300
8	450~550	≥16	1200	≤300
9	550~650	≥16	1300	≤300
10	650~760	≥20	1400	≤300
11	760~860	≥20	1500	≤300
12	860~960	≥20	1600	≤300
13	960~1050	≥20	1700	≤300

Note: The chain sling may be broken if the single cutting height exceeds the max. value.

Spec.	Parameters
Pile diameter range	Φ600~Φ1800mm
Max. module quantity	18 units
Max. rod pressure force	600kN
Max. cylinder stroke	180mm
Max. cylinder pressure force	30MPa
Max. working flow of single cylinder	30L/min
Max. height of single cut	≤300mm
Complete machinery weight	≥35t
Single module weight	230kg
Single module size	696×565×350mm
Operation size	3316×4000mm
Total weight	4.5t

main1

Module quantity	Pile dia. range (mm)	Platform weight (t)	Total weight(kg)	Single cutting height (mm)
8	600	≥20	2200	≤300
9	700	≥20	2430	≤300
10	800~900	≥25	2660	≤300
11	1000	≥25	2890	≤300
12	1100	≥25	3120	≤300
13	1200	≥28	3350	≤300
14	1300~1400	≥28	3580	≤300
15	1500	≥30	3810	≤300
16	1600	≥30	4040	≤300
17	1700	≥35	4270	≤300
18	1800	≥35	4500	≤300

Note: The chain sling may be broken if the single cutting height exceeds the max. value.

Specification	FP400S	FP450S	FP500S
Pile diameter range	Φ250~Φ400mm	Φ350~Φ450mm	Φ350~Φ500mm
Max. rod pressure force	280kN	280kN	280kN
Max. cylinder stroke	135mm	135mm	135mm
Max. cylinder pressure force	30MPa	30MPa	30MPa
Max. working flow of single cylinder	20L/min	20L/min	20L/min
Max. height of single cut	≤300mm	≤300mm	≤300mm
Complete machinery weight	≥7t	≥8t	≥10t
Operation size	1440×1440×1500mm	1490×1490×1500mm	1588×1588×1500mm
Total weight	0.6t	0.65t	0.92t

main3

Specification	FP800W
Max. rod pressure force	280kN
Max. cylinder stroke	135mm
Max. cylinder pressure force	30MPa
Max. working flow of single cylinder	20L/min
Single cut size (L×H)	250×200mm
Cutting width range	300×800mm
Complete machinery weight	≥7t
Operation size(L×H×W)	1880×748×920mm
Total weight	1.2t