Pile Breaker
FES pile breaker produces a perfect horizontal pile cutting without leaving cracks below the cut-off level. Using advanced modular design, it can be used for crushing piles of different diameters by changing the modular combination quantity.
-Convenient assembly allows easy transportation and increases work efficiency.
-Modular design makes it easy to adjust to each concrete pile diameter.
-Easy to maintain, with low maintenance cost.
-Simple and safe operating system, less staffing, lower construction cost.
-It can be installed on a large variety of construction machineries, realizing the versatility and economy.
-Three options available: round type, square type and walled type.
-Can be powered by either a power pack or any equipment installed with hydraulic power source (such as the excavator, etc.)
| Specification | Parameters |
| Pile diameter range | Φ960~Φ1050mm |
| Max. module quantity | 13 units |
| Max. rod pressure force | 280kN |
| Max. cylinder stroke | 135mm |
| Max. cylinder pressure force | 30MPa |
| Max. working flow of single cylinder | 20L/min |
| Max. height of single cut | ≤300mm |
| Complete machinery weight | ≥20t |
| Single module weight | 100kg |
| Single module size | 645×444×316mm |
| Operation size | 2098×4840mm |
| Total weight | 1.7t |
| Modulequantity |
Pile dia. range (mm) |
Platform weight (t) |
Total weight (kg) |
Single cutting height (mm) |
|
6 |
300~350 |
≥12 |
1000 |
≤300 |
|
7 |
300~450 |
≥12 |
1100 |
≤300 |
|
8 |
450~550 |
≥16 |
1200 |
≤300 |
|
9 |
550~650 |
≥16 |
1300 |
≤300 |
|
10 |
650~760 |
≥20 |
1400 |
≤300 |
|
11 |
760~860 |
≥20 |
1500 |
≤300 |
|
12 |
860~960 |
≥20 |
1600 |
≤300 |
|
13 |
960~1050 |
≥20 |
1700 |
≤300 |
Note: The chain sling may be broken if the single cutting height exceeds the max. value.
| Spec. | Parameters |
| Pile diameter range | Φ600~Φ1800mm |
| Max. module quantity | 18 units |
| Max. rod pressure force | 600kN |
| Max. cylinder stroke | 180mm |
| Max. cylinder pressure force | 30MPa |
| Max. working flow of single cylinder | 30L/min |
| Max. height of single cut | ≤300mm |
| Complete machinery weight | ≥35t |
| Single module weight | 230kg |
| Single module size | 696×565×350mm |
| Operation size | 3316×4000mm |
| Total weight | 4.5t |
|
Module quantity |
Pile dia. range (mm) |
Platform weight (t) | Total weight(kg) |
Single cutting height (mm) |
|
8 |
600 |
≥20 |
2200 |
≤300 |
|
9 |
700 |
≥20 |
2430 |
≤300 |
|
10 |
800~900 |
≥25 |
2660 |
≤300 |
|
11 |
1000 |
≥25 |
2890 |
≤300 |
|
12 |
1100 |
≥25 |
3120 |
≤300 |
|
13 |
1200 |
≥28 |
3350 |
≤300 |
|
14 |
1300~1400 |
≥28 |
3580 |
≤300 |
|
15 |
1500 |
≥30 |
3810 |
≤300 |
|
16 |
1600 |
≥30 |
4040 |
≤300 |
|
17 |
1700 |
≥35 |
4270 |
≤300 |
|
18 |
1800 |
≥35 |
4500 |
≤300 |
Note: The chain sling may be broken if the single cutting height exceeds the max. value.
|
Specification |
FP400S | FP450S | FP500S |
|
Pile diameter range |
Φ250~Φ400mm | Φ350~Φ450mm | Φ350~Φ500mm |
|
Max. rod pressure force |
280kN | 280kN | 280kN |
|
Max. cylinder stroke |
135mm | 135mm | 135mm |
|
Max. cylinder pressure force |
30MPa | 30MPa | 30MPa |
|
Max. working flow of single cylinder |
20L/min | 20L/min | 20L/min |
|
Max. height of single cut |
≤300mm | ≤300mm | ≤300mm |
|
Complete machinery weight |
≥7t | ≥8t | ≥10t |
|
Operation size |
1440×1440×1500mm | 1490×1490×1500mm | 1588×1588×1500mm |
|
Total weight |
0.6t | 0.65t | 0.92t |
| Specification | FP800W |
| Max. rod pressure force | 280kN |
| Max. cylinder stroke | 135mm |
| Max. cylinder pressure force | 30MPa |
| Max. working flow of single cylinder | 20L/min |
| Single cut size (L×H) | 250×200mm |
| Cutting width range | 300×800mm |
| Complete machinery weight | ≥7t |
| Operation size(L×H×W) | 1880×748×920mm |
| Total weight | 1.2t |
